Ask the Technician
S Wrote:We have a fire alarm system installed ~ 2000, it started beeping trouble, runs through all the points as troubles, then restores to normal. Fire alarm technicians cannot figure it out.
It started doing this after a very cold weekend (temps less than 10), and the trouble monitor seems to be getting more frequent, now ~ every 15 minutes. It has been of course driving the people in the building it is located crazy.
Douglas Krantz Wrote:You need to know whether the panel is having problems or something in the rest of the building is having problems. Start by dividing the panel from the building fire alarm system.
Disconnect all wires from the panel; see if the panel becomes stable. If, with all wires disconnected, the problems persist, the panel may have problems and needs repair or replacement. If the problem stops, start connecting the wires, one pair at a time. Find what wires cause the problem and continue to troubleshoot from there.
Just use standard troubleshooting procedures; assume the problem is somewhere, and do what it takes to find it and then fix it.
Help - I have a City Circuit Trouble on My Panel -- I have a question about our Simplex 4005 fire panel. It is showing a "City Circuit Trouble 1". It's after hours and on the weekend ... Read More
Is the Fire Alarm Control Panel Necessary? -- Having detected a fire, a fire alarm system sounds the alarm. Other than the building wires that carry the signal from the fire detector to the fire horn, everything else in a fire alarm system ... Read More
What Should One Look For in a Fire Alarm Panel? -- The question has been asked, "Which is the best fire alarm panel?" A fire alarm system isn't: installed for the manufacturer or... Read More
I have this subject panel made by a company As Built -- I have a fault on the panel saying battery charger. I am unable to find the part for this panel. Can you help? ... Read More