Logo -- Douglas Krantz Technicians Corner
I have a question on how something works.

I have a Question

Just one question. Does the air pressure gauge and water pressure gauge show different psi or will they be the same after adding the water to the system? Thanks for any help.

Signed B E

In the sprinkler system plumbing, the air pressure gauge and the water pressure gauge show the pressure of two different sprinkler systems. These two systems are the dry sprinkler pipes and the wet sprinkler pipes.

The systems are separated by a moveable metal plate called a clapper. The clapper is inside an assembly sometimes called a clapper valve, or dry system valve.

The clapper is being held in place by the pressurized air in the dry sprinkler system; so air, basically, is holding back the water.

To receive a free diagram showing the basic dry sprinkler system, tap here.

Normally, when the water isn't in the dry system part of the sprinkler system, the air is pressurized and presses against one side of the clapper. Water, which is also pressurized, pushes against the other side of the clapper.

The important part to this is that on one side of the clapper, pressurized air pushes against the whole area, while on the other side of the clapper, water only pushes against a small area. Even though the pressure of the air is lower than the pressure of the water, because the area of push against the clapper by the air is far greater than the area of push by the water, the pressurized air keeps the clapper from moving out of the way of the water.

By opening a sprinkler head, heat from a fire lets the air out of the dry sprinkler system. The air pressure then drops and the air no longer holds the clapper in place. The water pressure, no longer opposed by air pressure, pushes the clapper out of the way and the dry system is flooded; the dry system has become wet.

The gauges are showing the pressure of two separated sprinkler systems. To answer the question, the only condition where the air pressure gauge and the water pressure gauge show the same pressure is when the clapper of the valve no longer separates the dry sprinkler system from the wet sprinkler system.

Douglas Krantz

More Articles

Why Does It Seem that Dry Sprinkler Systems Only Show Low Air Pressure At Night? -- Doesn't it always seem to happen? In the middle of the night, someone's fire alarm fire alarm system sends... Read More

What Turns On a Fire Pump? -- Fire pump controller boxes are large, and the only people who should even open the controllers are authorized sprinkler... Read More

What is a Dry Sprinkler Valve? -- When a fire starts burning in a building, action needs to be taken early... before the fire has grown out of control. Taking this action, sometimes before anyone even... Read More

Which is Worse -- Fire or Water? -- At some point a decision needs to be made, which is worse - the fire or excess water... Read More

Short Circuit
Free Subscription
I'll Send You the
Fire Alarm